Red Marenti Plywood

RED MARENTI PLYWOOD
*Exterior /Interior
*Stable, Resistant
*High-Performance Plywood
*Manufactured Using Fresh Logs

We have 6 QC teams to inspection such as moisture control, glue inspection both before production and after production, material grade selection, pressing checking, and thickness checking. Our aim is to supply high quality product with reasonable price.

Tough stable water proof panel.
Equal or nearly equal laminations.
Made with water and boil proof (WBP) glue.
Face veneers are one piece.
Grain is fairly even and straight.
Harder, rot resistant and makes a stiffer panel.
Good structural plywood for bottoms and larger boats.
May also use for decks, freezers, signs, exterior structures, cabinets and other construction.

Raw Material Preparation

1.Log: High-quality logs are selected and cut into specific lengths suitable for peeling.

2.Rotary cutting: Logs are peeled into continuous veneer sheets using high-precision rotary lathe machines.

3.Veneer: The peeled veneers are clipped to size and dried to the optimal moisture content to prevent warping.

Core Assembly

4.Gluing: Uniform layers of adhesive are applied to the dried veneer sheets.

5.Veneer joint: Veneers are manually or mechanically joined to form full-size layers without gaps.

6.Cold-pressed: The layered veneers undergo initial cold pressing to bond them temporarily and ensure alignment.

7.Repair: Any core defects or holes are manually patched to create a smooth, solid surface.

8.Hot-pressed: The assembled core is subjected to high heat and pressure to cure the glue and solidify the structure.

9.Second repair: The hardened core is inspected and sanded again to fix any remaining surface imperfections.

Finishing & Lamination

10.Platform sanded: The core board surface is precision-sanded to ensure it is perfectly flat and smooth.

11.Gluing (Face/Back): Adhesive is applied to the sanded core in preparation for the face and back veneers.

12.Laminated: High-quality face and back veneers are carefully laid onto the core board.

13.Cold-pressed: The full assembly is cold-pressed again to ensure the layers are securely positioned before final curing.

14.Hot-pressed: The final hot pressing process bonds all layers permanently under extreme heat and pressure.

Final Trimming & Quality Control

15.Sanding: The finished panel is calibrated and sanded to achieve the exact thickness and a smooth finish.

16.Edged cut: Panels are trimmed by saw to standard dimensions with clean, square edges.

17.Inspected: Every board undergoes a strict final quality check for surface defects and structural integrity.

18.Finished product: Approved panels are graded, stamped, and packed securely for shipment.

Hot Tags: red marenti plywood, China red marenti plywood suppliers, Bendy Plywood Home Depot, INTERIOR ACOUSTICS, Plastic Coated Shuttering Plywood, Natural Red Oak Faced Plywood 4x8, High Quality Baltic Birch Plywood, two times marine plywood 18mm