Home > News > Content

How To Deal With The Gaps in The Door Panels?

Dec 15, 2024

‌The methods for dealing with the gaps in the door panels mainly include the following:

‌Adjust the hinge screws‌: Use a cross cone to adjust the screws under the hinges to push the cabinet door forward to solve the problem of sagging after the door is closed. Or adjust the screws on the right side of the hinge to tilt the bottom of the cabinet door to the inside of the door to solve the problem of a large gap above the door after closing. ‌

‌Re-adjust the position of the door panel‌: If the connection part is well tightened but there is still a large gap, you can loosen the connector and readjust the angle of the door panel, and then tighten the connector again.

‌Use gaskets‌: If adjusting the position of the door panel does not solve the problem, you can consider using gaskets to fill the door gaps. The gasket material can be wood, rubber, silicone or rubber, etc., and different thicknesses can be selected according to the size of the gap.

‌Fill the gap‌: If the gap is too large and cannot be solved with a gasket, you can consider using fillers to fill the gaps between the door panels. The filler can be polyurethane foam or wood board, etc., and choose a material with moderate hardness and easy processing.

‌Replace the door panels‌: If the above methods do not work, you may need to consider replacing the door panels.

Send Inquiry